How to make a modular electrical installation by rails in 3 simple steps?

As we have already explained in a previous publication , a modular electrical installation by rails is the safest and most efficient option to carry out in a bus.

It is the perfect alternative to conventional fixed sockets. Electrical distribution will no longer be subject to the position of fixed sockets. From now on, no need to worry about the cost, time, inconvenience and inconvenience of changing the sockets.

Since it offers us, among others, the following advantages :

Modular installation : the seats can be moved or removed without affecting the installation.
The electrical installation can be done in just a few hours, this speed of installation saves the cost of labor.
By being modular, repairs are easier and there is no need to stop the vehicle if a seat needs to be re-upholstered.
You can reconfigure the number of seats as many times as you want without affecting the installation.
IT'S SECURE, ALL ITS COMPONENTS HAVE THE R10 R118.

Thanks to the important benefits that the system of modulation by rails brings us, it is the ideal option to carry out the electrical installations . It is a very easy system to install, since the time it takes to screw the cable tray in a conventional fixed system corresponds here to the time of the complete installation of a modular rail system.

The 3 steps to follow to create a modular energy installation using rails are as follows:

STEP 1: Request a consultation to study the needs of the vehicle. Measure the total meters to be installed to calculate the necessary rails as well as the beginnings and ends of portions.

STEP 2: Plan the installation, with a plan produced by Azimut in which the installation is explained in detail.

STEP 3: Once you have the necessary hardware just screw in the rails and power up the ends.

You already have your system ready to use, choose the sockets and components to connect and let your passengers enjoy the journey.

Other key points of this solution:

This track can handle 32 amps and has ground wiring for safety.

Another important advantage of this modular system is to provide a solution to the problems of connecting seats in the reduced mobility area (PRM). We use the system to be able to dismantle the seats in the PMR area without affecting the rest of the electrical or entertainment installations.

It is an innovative distribution rail that allows any coach to add, remove or replace sockets in a simple and secure way, where and when necessary, throughout its entire length. With a wide variety of finishing options that will satisfy both electrical supply and design needs. Components such as plugs from any country, USB plugs or specific connectors can be installed in the track to power each pair of seats and thus facilitate the installation of the entertainment system, for example. Also, these systems can be blocked so that they cannot be manipulated or lost and can benefit from a secure, protected and uncomplicated system.